|
How
To Measure Your Project
NOTE:
Make sure to write down the Fig. # that most
illustrates your particular project along with your
Dimensions (A-B-C, etc.) because you will need
that information on the Quote Submission
Form.
|
| |
Fig.
I - Attached, No Overhang
|
| |
|
|
Maximum
Span (Span can be increased by adding support or
fan beams. However, in snow areas, spans will be shorter)
| Panel
Type |
Gauge |
Max
Span |
| Deep
"W" |
.025 |
15'
6" |
| |
.032 |
17'
6" |
| |
.040 |
19' |
| VeeTee |
.025 |
11'
6" |
| |
.032 |
14' |
| Quad-16 |
.025 |
11' |
| |
.032 |
12'
6" |
|
Quote
Submission Form
|
|
| |
Fig.
II - Attached, With Overhang
|
| |
|
|
Maximum
Overhang (D from fig.II)
| Panel
Type |
Gauge |
Max
Overhang |
| Deep
"W" |
.025 |
4' |
| |
.032 |
5' |
| |
.040 |
6' |
| VeeTee |
.025 |
3' |
| |
.032 |
4' |
| Quad-16 |
.025 |
2'
6" |
| |
.032 |
3' |
|
Quote
Submission Form
|
|
| |
Fig.
III - Free standing - Side Drain
|
| |
|
|
Maximum
Distance Between Posts
10' is the maximum distance between posts. This
can be increased to 30' using aluminum I-Beams.
When posts exceed 12' in height (above ground) steel
posts must be used in place of standard aluminum.
NOTE: On freestanding covers, posts must be 2'
below ground.
Quote
Submission Form
|
|
| |
Fig.
IV - Free Standing - Front (or rear) Drain
|
| |
|
|
Pitch
and Drop
| "W"
and VeeTee panels: |
1/4
inch per foot (ex. 12' = 3" drop) |
| Quad-16
panels: |
1/2
inch per foot (ex. 12' = 6" drop) |
|
Quote
Submission Form
|
|